The EVOLVE 2 aircraft and its Ground Station should be paired out of the box per factory settings. In the event you need to repair the aircraft and the Ground Station, please follow the steps below:
PAIRING PROCEDURES
1. Navigate to the Pairing Page under the following path: DRONE SETTINGS > GROUND STATION > PAIRING
2. Turn on the aircraft.
3. Keep the aircraft at least 3 ft away from the Ground Station.
4. Tap “Start Pairing” on the Ground Station screen.
5. Follow the on-screen instructions until the pairing is complete.
Only required if the pilot is trying to pair a new aircraft to the Ground Station or a new Ground Station to the aircraft.
