無人機知識庫
The Ground Station LED indicator is located below the bottom screen. The LED indicates the current state of the Ground Station battery. When charging, the Ground Station LED will blink Red, until the battery is fully charged. Once charged, the LED will stop blinking. During normal operation, the LED will be displayed in constant...
INSERTING THE GROUND STATION BATTERY STEPS FOR INSERTING THE GROUND STATION BATTERY 1. First ensure the battery is powered off. 2. Slide the latch to the right and insert the battery into the Ground Station. 3. Release the latch when the battery is securely inserted. REMOVING THE GROUND STATION BATTERY...
When powering on the Ground Station, be sure to provide at least 3 to 6 ft (1 to 2m) of space between the Ground Station and the aircraft. (If the Ground Station and aircraft are too close together the system may not properly connect.) Short press and long-press the power switch until...
CHARGING THE GROUND STATION BATTERY The Ground Station battery can be charged with the supplied battery charger whilst inserted into the Ground Station‘s main housing. CHARGING THE GROUND STATION BATTERY 1. Connect the charger to a power source. 2. Connect the Ground Station Battery. 3. Connect the Ground Station Battery Charging...
To ensure that the map can be displayed outdoor without network, Smart Pilot System offers the offline map download feature. Follow the steps below to download the map. Connect Ground Station to WiFi internet connection with download capabilities Navigate to the Smart Pilot System Offline Map Page (Setting > Map...
The EVOLVE 2 aircraft system is pre linked from the factory. If there‘s a situation which requires the Ground Station and the aircraft to be re-linked, or to pair the Ground Station to a new aircraft, please follow the steps below: Navigate to the Smart Pilot System aircraft Pairing Page. (Settings > Ground...
You can connect the Ground Station under the following path: DRONE SETTINGS > GENERAL > WI-FI. The Ground Station will automatically cut off internet connection once the aircraft is launched to avoid interference. If you wish to switch on the Wi-Fi during flight, you can do so under the following path: DRONE...
FIRMWARE UPDATES The Smart Pilot APP guides the user through the Firmware Update process. Firmware Update requests are displayed on the Ground Station screen. Whenever an update is available, the Smart Co-Pilot system will request the operator perform the update when the Ground Station is connected to an internet connection. This process...
Use the Album tab to view your photos and videos. The editing tool is also available for quick edits. 1. Navigate to the Smart Pilot System Album tab. 2. The bottom screen will display the images and videos on the Ground Station. 3. Tap the media on the screen. 4....