無人機知識庫
The aircraft camera has full control over key shooting settings, all of these settings can be found in the camera settings page in the Smart Co-Pilot System. Select the icon indicated in the diagram below to configure settings for the camera. Standard settings are similar to those found in most...
The camera system has an LED indicator located beside the camera lens mount. This indicator displays the camera’s status.
CREATIVE ASSISTANT The Creative Assistant feature offers an on-screen template to easily optimize scene composition.Visual templates include circle, diagonal, grid, golden ratio, quadrant, simple division, thirds, triangle and vanishing. To enable this feature, please use the following path: CAMERA SETTINGS (TOP SCREEN) > GENERAL > GRID DISPLAY
To ensure proper installation and removal of the camera lens, please follow the diagram below. ATTACHING THE CAMERA LENS To attach the lens, align the red mark on the back of the lens with the red mark on the camera mount Once align, screw the lens CW. You should also hear...
AUTO GIMBAL CALIBRATION AND CENTRALIZE GIMBAL If you have noticed that the gimbal is not centered, you can run the Auto Gimbal Calibration under the following path: DRONE SETTINGS > GIMBAL > AUTO GIMBAL CALIBRATION Auto Gimbal Calibration will be disabled after takeoff. If you have noticed the gimbal is not...
The Astra m4/3 system supports a vast array of lenses from multiple manufacturers that are small, lightweight lenses that let you take a load off while still performing beautifully. The smaller size, focal length (35mm equivalent), aperture and AF speed provide amazing choices for even the most discerning filmmaker. Olympus...
Locate the red mark on the gimbal and align it to the unlock icon on the attachment mount. Then screw the gimbal CCW. Release the gimbal release button when the red mark aligns with the lock icon on the attachment mount. You should also hear a click when the gimbal is securely mounted....
The Ground Station has 6 customizable buttons allowing our users to personalize control of the camera and gimbal. You can customize the buttons under the following path: DRONE SETTINGS > GROUND STATION > BUTTON CUSTOMIZATION
ANTENNAS (INTERNAL/EXTERNAL) You can fly with the built-in antennas or mount external antennas for extra range or stronger signal. To enable external antennas on the User Interface, please use the following path: DRONE SETTINGS > GROUND STATION > ANTENNAS ORDRONE > START HERE > CHECKLIST > ANTENNAS (Bottom of the list
The EVOLVE 2 aircraft and its Ground Station should be paired out of the box per factory settings. In the event you need to repair the aircraft and the Ground Station, please follow the steps below: PAIRING PROCEDURES 1. Navigate to the Pairing Page under the following path: DRONE SETTINGS > GROUND...