ARMING THE AIRCRAFT
ARMING PRE-CHECK
The EVOLVE 2 makes several internal calibrations and adjustments before each flight. If for any reason, any of the vital sensors or internal equipment has a safety issue, the aircraft will not ARM upon the ARM command given by the operator’s stick and the LEDs under each motor will turn RED. Please refer to the Smart Pilot screen to check for the diagnoses in order to correct the problem.
ARMING
Before arming the aircraft make sure pre-flight checklists are complete and the aircraft is in an area clear of obstacles and loose debris as loose debris can damage the propellers and possibly cause loose debris to act as projectiles doing damage to surrounding property and personnel.
Push both control sticks down and to the right and wait for the LED’s light to change. Move the throttle stick to the middle position and the aircraft is ready to take off manually.
When arming, the LED’s indicators will fast blink different colors followed by a long beep, the motors will then engage, and the propellers will start spinning
